CONTACTMENU
CATALOG
With the VAD5400 proportional control system, amount of material to be spread on to the surface which is pre-determined by the operator is fixed. With its specially designed Spray Bar, this amount is precisely spread at 5400mm width.
The control of the system is provided by the panel in the operator's cab. After the amount of material to be spread per m2 and the spread width has been selected, the start of the spreading, the speed of the pump according to the speed of the vehicle adjustment and the stop of the vehicle with automatic stopping of the spreading happen automatically.
Total spread material, km, instantaneous vehicle speed, instant pump speed can be seen by the operator on the screen of the panel.
| Capacity | 8.000 - 13.500 Liters |
|---|---|
| Isolating Sheet | Aluminium Sheet 1mm |
| Isolating Material | Rockwool 50mm |
| Drive Type | Hydrostatic Control |
| Power | Vehicle PTU (Power Transmission Unit) |
| Controls | Digital Control |
| Pump Type | 3”VAD Pump (80m3/h) |
| Spray Bar Span | 2400 - 5400mm |
| Spreading Lane Width | 300mm, 18 Groups of Pneumatics |
| Valve Controls | Pneumatic - Electric On-Off |
| Heating System | Two Diesel Burners(min 190kw, max 310kw) |
Re-Suction (This function allows the material to be returned to the tank again at the end of the series). Intermediate pump (This function allows the transfer of the material from one source to another without mixing with the material in the tank using the Distributor)
VAD Series Asphalt Distributors are designed according to the request of our customers to be suitable for their own countries’ new or second-hand trucks. So, the high truck import expenses will be reduced. VAD Series can be put pre-montaged in to a 40ft container thanks to this design transportation costs are reduced significantly and it took only 5-7 days for the installation and training.
The Asphalt Pump is mounted on a plate which is welded to the back plate of the tank. The pump has two intake lines and two discharge lines. The body of the asphalt pump is designed to remain in the tank so that freezing in the pump is prevented. Thanks to the internal valves on the pump, the system performs all functions without the need for complicated piping system.
Maintenance and cleaning are provided much more quickly and easily.
8’’ diameter 2 flame tubes are placed along the tank in U format. With 2 units of 26kg / h, min 190kw - max 310kw electric burner, the material is heated quickly and efficiently. Heating controls are accessible from the rear control panel. After entering the desired temperature value from the screen with the help of a single button operator can activate the heating. When the material reaches the specified temperature, the burners are switched off automatically, thus ensuring safety during heating.
Thanks to the special designed control panel located in the operator's cab, the operator can get all functions such as circulation, automatic / manual spreading, intermediate pump feature, system cleaning, as well as controls such as pneumatic spray-bar locks, positions, paving width and spray bar movement of the spray bars.
With dedicated Asphalt Distributor Pump, critical functions can be performed with valves which are located both inside the pump and at the piping. Pneumatic actuators can be controlled directly from the cabin.
• Re-Suction
• Tank Filling and Tank Circulation
• Automatic / Manual Spraying
• Tank Discharge
• Intermediate Pump
• System Cleaning
Specific to the models of VAD5400 and VAD3600A with precise flow adjustment and specially designed spray-bar 5400mm'de perfect spreading can be made. The system works by reading the data such as vehicle speed and spread width by providing instantaneous pump flow for the desired amount of spreading. Spreading width can be increased or decreased during operation, the operator can accelerate or slow down according to the condition of the road, while the operator is focus on driving system can start, maintain and finish spreading.
The mechanical joints are important for the sealing and long-life use of the spray bar. Connectors used in the VAD Series asphalt Distributor allow the entire 5400mm spray-bar to be raised, lowered, or moved sideways.
With teflon and copper threaded material sealing is obtained. Flange structure provides easy maintenance and repair.
We have all road construction machines. Find the product you need.
ALL PRODUCTS
Vimpo Road Construction MachinesVimpo Viskoz Mayi Pompa Sanayi Ticaret Taahhüt Ltd. Şti.
VIDEO
GALLERY
GALLERY
GALLERY
GALLERY
GALLERY
GALLERY
GALLERY
GALLERY
GALLERY
GALLERY
GALLERY
GALLERY
GALLERY
GALLERY